VCAT I Junior Vibration Analyst

  • This course will help you understand the relevance of vibration analysis, gain a solid understanding of the fundamentals of vibration analysis, learn methods about quality, dependable measurements, and you will begin the process of diagnosing common faults with vibration analysis.

    Gain confidence and become certified to ISO 18436-2 Category I via the internationally respected Mobius Institute Board of Certification [MIBoC]™. The MIBoC certification is accredited to ISO/IEC 17024 – there is no higher standard. Be one of the thousands of other Mobius™ certified analysts around the world.

  • Here are some of the topics that will be discussed in this course:

    • Maintenance Practices
    • Condition Monitoring
    • Principles of Vibration
    • Introduction to Vibration Measurement
    • Introduction to Time Waveform
    • An Introduction to Spectrum
    • A Brief Introduction to Phase
    • Signal Processing
    • Vibration Analysis
    • What is Resonance
    • Diagnosing Common Fault Problems
    • Setting Alarm Limits
  • This training includes:

    • Access to Mobius Institute Training Management System Portal
    • Mobius Institute Learning Zone Access for 6 months
    • Certificate of Attendance
  • This course is recommended for those who are relatively new to vibration analysis, will be assigned to collect vibration data, will be analysing vibration data, to professionals who are looking for opportunity to develop new skills in the field of machine condition & vibration analysis and have a rewarding career in the field of reliability engineering.

    • Q: Does Mobius Institute allow other participants and certified personnel by Vibration Institute to take Mobius certification exam?
    • A: Yes. You just have to provide supporting documents for proof of training attendance.
    • Q: How can I secure a seat?
    • A: You just have to complete CRE Registration Form. Contact CRE for more information.
    • Q: How long does the exam last.
    • A: The exam is held on the last day of the training. The examination lasts for 2 hours.
    • Q: What is the passing grade of the certification exam?
    • A: The passing grade is 70%.

VCAT II Intermediate Vibration Analyst

  • Now that you have fundamental understanding on vibration analysis and proper data gathering, it is time to be a successful, confident, and competent vibration analyst.

    In this course, you will learn how to diagnose a wide range of fault conditions, collect the right data with the correct vibration analyzer settings, useful tips and tricks so that you may validate the diagnoses that you make, and most importantly, you will learn shaft alignment and balancing so that you can improve the reliability of the equipment.

    Gain confidence and become certified to ISO 18436-2 Category II via the internationally respected Mobius Institute Board of Certification [MIBoC]™. The MIBoC training and certification exam follow ISO 18436-2 and ISO/IEC 17024 – there is no higher standard. Be one of the thousands of other Mobius™ certified analysts around the world.

  • Here are some of the topics that will be discussed in this course:

    • Review of Maintenance Practices
    • Review of Condition Monitoring Technologies
    • Principles of vibration; Review of basics, waveform, spectrum (FFT), phase and orbits
    • Understanding signals: modulation, beating, sum/difference
    • Data acquisition
    • Signal processing
    • Vibration spectrum analysis
    • An introduction to time waveform analysis
    • An introduction to orbit analysis
    • Phase Analysis: bubble diagrams and ODS
    • Enveloping (demodulation), shock pulse, and spike energy
    • Fault analysis
    • Equipment testing and diagnostics including impact testing (bump tests) and phase analysis
    • Corrective action
    • Running a successful condition monitoring program
    • Acceptance testing
    • Review of ISO Standards
  • This training includes:

    • Access to Mobius Institute Training Management System Portal
    • Mobius Institute Learning Zone Access for 6 months
    • Certificate of Attendance
  • This course is design for personnel who will be assigned to collect vibration data, validate the quality of data, perform root cause analysis, confirm unbalance, misalignment, looseness, and other conditions.

Airborne Ultrasound Inspection I

Airborne Ultrasound Inspection I

01-23-2023 - 01-27-2023
Vibration Analysis I

Vibration Analysis I

02-08-2023 - 02-11-2023
Oil Analysis II

Oil Analysis II

03-08-2023 - 03-11-2023
Vibration Analysis II

Vibration Analysis II

03-20-2023 - 03-24-2023
Machinery Lubrication I

Machinery Lubrication I

04-25-2023 - 04-28-2023
Airborne Ultrasound Inspection I

Airborne Ultrasound Inspection I

05-16-2023 - 05-20-2023
Oil Analysis II

Oil Analysis II

06-07-2023 - 06-10-2023
Infrared Inspection I

Infrared Inspection I

06-13-2023 - 06-17-2023
Vibration Analysis I

Vibration Analysis I

07-18-2023 - 10-21-2022

Vibration Analysis II

08-07-2023 - 08-11-2023
Machinery Lubrication I

Machinery Lubrication I

08-16-2023 - 08-19-2023
Machinery Lubrication Engineer

Machinery Lubrication Engineer

09-26-2023 - 09-30-2023